UF Membrane Module 6 inch PVDF Ultrafiltration Membrane Module UFf160 Na-egweri Ihe Ngwọta Mmiri Efere

UF Membrane Module 6 inch PVDF Ultrafiltration Membrane Module UFf160 Ngwọta Mmiri n'efu

Nkọwa dị mkpirikpi:

● Bangmo PVDF ihe nwere ezigbo nguzogide mmetọ, nguzogide oxidation, ma dị mfe ihicha;

● Bangmo PVDF ihe nwere nnukwu mgbanwe, mmepụta kwụsiri ike na ogologo ndụ ọrụ;

● Njikwa dị mfe, ọrụ na-aga n'ihu, njikwa anya;

● Ịsacha mmiri gas na ntanetị, mgbake dị mma;

● Obere akara ukwu, nhazi kọmpat, imewe modular na-emetụta ike ọrụ dị iche iche;

● Ọrụ nrụgide dị ala, nchekwa ike;

● Enwere ike iji kemịkalụ ụlọ ọrụ maka ịsacha akpụkpọ ahụ iji chekwaa ego;

● Mma mmepụta dị mma, ọnụego mgbake dị elu, nchekwa mmiri mmiri;

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Nchịkọta ngwaahịa

UFf160 capillary hollow fiber membrane bụ ihe polymer dị elu, nke na-agaghị enwe mgbanwe ọ bụla. Ihe PVDF emezigharịrị, nke a na-anakwere na ngwaahịa a, nwere oke ọnụọgụ dị mma, ihe eji arụ ọrụ dị mma, ezigbo nguzogide kemịkalụ na nguzogide mmetọ. MWCO bụ 200K Dalton, akpụkpọ ahụ ID / OD bụ 0.8mm / 1.3mm, ụdị nzacha dị n'èzí.

Ngwa

Ngwọta mmiri ọṅụṅụ nke mmiri pọmpụ, mmiri elu, mmiri olulu mmiri na mmiri osimiri.
Ngwọta nke RO.
Ọgwụgwọ, imegharị na iji mmiri mkpofu ụlọ ọrụ eme ihe.

Arụmọrụ nzacha

Achọpụtara na ngwaahịa a nwere mmetụta nzacha n'okpuru dịka ọnọdụ ọrụ nke isi mmiri dị iche iche si dị:

Ngwakọta	Mmetụta
SS, akụkụ> 1μm	Ọnụego mwepụ ≥ 99%
SDI	≤ 3
Nje bacteria, nje	> 4 ndekọ
Turbidity	<1NTU
TOC	Ọnụego mwepụ: 0-25%

* N'elu data enwetara n'okpuru ọnọdụ na nri mmiri turbidity bụ <25NTU.

Ngwa ngwaahịa

nkọwa ngwaahịa110

Nka nka:

Ụdị nzacha	N'èzí-na
Ihe Membrane	PVDF emegharịrị
MWCO	Dalton 200k
Mpaghara Membrane	40m2
NJ Membrane/OD	0.8mm / 1.3mm
Akụkụ	Φ160mm*1810mm
Nha Njikọ	Njikọ DN40 Union

Data ngwa:

Flux mmiri dị ọcha	8,000L/H (0.15MPa, 25 ℃)
Flux emebere	40-120L/m².hr (0.15MPa, 25 ℃)
Nrụgide Ọrụ akwadoro	≤ 0.2MPa
Nrụgide transmembrane kacha	0.15MPa
Nrụgide ịsa azụ kacha	0.15MPa
Olu ịsacha ikuku	0.1-0.15N m3/m².hr
Nrụgide ikuku ịsacha	≤ 0.1MPa
Okpomọkụ arụ ọrụ kacha	45 ℃
Ọnụ ego PH	Na-arụ ọrụ: 4-10; Ịsa: 2-12
Ụdị ọrụ	Ofefe gafere

Ihe achọrọ mmiri inye nri:
Tupu inye mmiri nri, a ga-edobe ihe nzacha nchekwa <50 μm iji gbochie mgbochi nke nnukwu irighiri mmiri dị na mmiri siri ike kpatara.

Turbidity	≤25NTU
Mmanụ & Griiz	≤2mg/L
SS	≤20mg/L
Mkpokọta Ígwè	≤ 1 mg/L
Chlorine fọdụrụnụ na-aga n'ihu	≤5pm
COD	Atụ aro ≤ 500mg/L

* Ihe mejupụtara akpụkpọ ahụ UF bụ plastik polymer organic, a gaghị enwe ihe mgbaze organic ọ bụla na mmiri raw.

Oke arụ ọrụ:

Ọnụego ịsa azụ azụ	100-150L / m².hr
Ugboro ịsa azụ	Kwa 30-60min.
Ogologo oge ịsa azụ	Afọ 30-60
Ugboro CEB	0-4 ugboro kwa ụbọchị
Ogologo oge CEB	5-10 nkeji.
Ugboro CIP	Kwa ọnwa 1-3
Chemicals ịsa:
Sterilisation	15ppm sodium Hypochlorite
Ịsacha ihe mmetọ Organic	0.2% sodium Hypochlorite + 0.1% sodium Hydroxide
Ịsacha Mmetọ Inorganic	1-2% Citric Acid/0.2% Hydrochloric Acid