UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Ngwọta Mmiri Ọ drinkingụ drinkingụ egosipụtara

UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Ọgwụ Ọṅụ Ọṅụ

Nkọwa dị mkpirikpi:

● E jiri ya tụnyere 6 inch na 10 inch membrane modules, 8 inch bụ ihe kacha dị irè;

● Ọkpụrụkpụ nke ụlọ UPVC bụ 6mm, ntachi obi na-erute 1MPa;

● Usoro mgbochi degumming na-eme ka resin epoxy na njedebe njedebe zuru oke, na-eme ka adhesion na tightness;

● Ịmepụta nchekwa na ebe mmiri na-eme ka ọ dị irè na-ebelata mmiri ịsa azụ na njedebe nke eriri oghere;

● Teknụzụ chaja nkewa nkewa na-eme ka mmiri na-ekesa ọbụna, mmiri na-asọ asọ adịghị egbochi ma ịsacha azụ na-arụ ọrụ nke ọma;

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Nchịkọta ngwaahịa

UFc200AM capillary hollow fiber membrane bụ ihe polymer dị elu, nke na-agaghị enwe mgbanwe ọ bụla. Ihe PVC gbanwere, nke a nakweere na ngwaahịa a, nwere ọnụ ọgụgụ dị mma nke na-eme ka ọ dị mma, ihe eji arụ ọrụ dị mma, ezigbo nguzogide kemịkalụ na mmetọ mmetọ. MWCO bụ 100K Dalton, akpụkpọ ahụ ID / OD bụ 1.0mm / 1.8mm, nzacha ụdị bụ n'ime-ime.

Ngwa

Mmepụta mmiri ịnweta mmiri, mmiri mmiri ugwu na mmiri mmiri ndị ọzọ na-adịghị mma.
Ịṅụ mmanya nke mmiri pọmpụ, mmiri elu, mmiri olulu mmiri, mmiri osimiri, wdg.
Ngwọta nke RO.
Ọgwụgwọ, imegharị na iji mmiri mkpofu ụlọ ọrụ eme ihe.

Arụmọrụ nzacha

Achọpụtara na ngwaahịa a nwere mmetụta nzacha n'okpuru dịka ọnọdụ ọrụ nke isi mmiri dị iche iche si dị:

Ngwakọta	Mmetụta
SS, akụkụ> 1μm	Ọnụego mwepụ ≥ 99%
SDI	≤ 3
Nje bacteria, nje	> 4 ndekọ
Turbidity	<0.1NTU
TOC	Ọnụego mwepụ: 0-25%

* N'elu data enwetara n'okpuru ọnọdụ na nri mmiri turbidity bụ <15NTU.

Ngwa ngwaahịa

nkọwa ngwaahịa15

Nka nka:

Ụdị nzacha	n'ime-apụ
Ihe Membrane	PVC emegharịrị
MWCO	100K Dalton
Mpaghara Membrane	27m²
NJ Membrane/OD	1.0mm / 1.8mm
Akụkụ	Φ200mm*1480mm
Nha Njikọ	DN40 Union

Data ngwa:

Flux mmiri dị ọcha	7,000L/H (0.15MPa, 25 ℃)
Flux emebere	35-100L/m2.hr (0.15MPa, 25 ℃)
Nrụgide Ọrụ akwadoro	≤ 0.2MPa
Nrụgide transmembrane kacha	0.2MPa
Okpomọkụ arụ ọrụ kacha	45 ℃
Ọnụ ego PH	Na-arụ ọrụ: 4-10; Ịsa: 2-12
Ụdị ọrụ	Cross-flow ma ọ bụ Ọnwụ-ọgwụgwụ

Ihe achọrọ mmiri inye nri:
Tupu inye mmiri nri, a ga-edobe ihe nzacha nchekwa <50 μm iji gbochie mgbochi nke nnukwu irighiri mmiri dị na mmiri siri ike kpatara.

Turbidity	≤15NTU
Mmanụ & Griiz	≤2mg/L
SS	≤20mg/L
Mkpokọta Ígwè	≤ 1 mg/L
Chlorine fọdụrụnụ na-aga n'ihu	≤5pm
COD	Atụ aro ≤ 500mg/L

* Ihe mejupụtara akpụkpọ ahụ UF bụ plastik polymer organic, a gaghị enwe ihe mgbaze organic ọ bụla na mmiri raw.

Oke arụ ọrụ:

Nrụgide ịsa azụ kacha	0.2MPa
Ọnụego ịsa azụ azụ	100-150L / m².hr
Ugboro ịsa azụ	Kwa 30-60min.
Ogologo oge ịsa azụ	Afọ 30-60
Ugboro CEB	0-4 ugboro kwa ụbọchị
Ogologo oge CEB	5-10 nkeji.
Ugboro CIP	Kwa ọnwa 1-3
Chemicals ịsa:
Sterilisation	15ppm sodium Hypochlorite
Ịsacha ihe mmetọ Organic	0.2% sodium Hypochlorite + 0.1% sodium Hydroxide
Ịsacha Mmetọ Inorganic	1-2% Citric Acid/0.2% Hydrochloric Acid