UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Mineral Water Treatment Featrated Image

UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Mineral Water Ọgwụgwọ

Nkọwa dị mkpirikpi:

● A na-ekewa eriri oghere n'ime akụkụ atọ, na-ekesakwa mmiri ịsa azụ n'akụkụ nke ọ bụla, na-ebute mmetụta azụ azụ ka mma;

● 304 igwe anaghị agba nchara clamping Ọdịdị na-enye nrụgide nrụgide dị elu, nke ọma na-egbochi nnukwu usoro UF site na mgbawa na ntanye n'ihi nrụgide dị elu ozugbo na mmetụta;

● Ogo njikọ ọkọlọtọ, nrụnye dị mfe;

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Nchịkọta ngwaahịa

UFc200BL capillary hollow fiber membrane bụ ihe polymer dị elu, nke na-agaghị enwe mgbanwe ọ bụla. Ihe PVC gbanwere, nke a nakweere na ngwaahịa a, nwere ọnụ ọgụgụ dị mma nke na-eme ka ọ dị mma, ihe eji arụ ọrụ dị mma, ezigbo nguzogide kemịkalụ na mmetọ mmetọ. MWCO bụ 100K Dalton, akpụkpọ ahụ ID / OD bụ 1.0mm / 1.8mm, nzacha ụdị bụ n'ime-ime.

Ngwa

Mmepụta mmiri ịnweta mmiri, mmiri mmiri ugwu na mmiri mmiri ndị ọzọ na-adịghị mma.
Ịṅụ mmanya nke mmiri pọmpụ, mmiri elu, mmiri olulu mmiri, mmiri osimiri, wdg.
Ngwọta nke RO.
Ọgwụgwọ, imegharị na iji mmiri mkpofu ụlọ ọrụ eme ihe.

Arụmọrụ nzacha

Achọpụtara na ngwaahịa a nwere mmetụta nzacha n'okpuru dịka ọnọdụ ọrụ nke isi mmiri dị iche iche si dị:

Ngwakọta	Mmetụta
SS, akụkụ> 1μm	Ọnụego mwepụ ≥ 99%
SDI	≤ 3
Nje bacteria, nje	> 4 ndekọ
Turbidity	<0.1NTU
TOC	Ọnụego mwepụ: 0-25%

* N'elu data enwetara n'okpuru ọnọdụ na nri mmiri turbidity bụ <15NTU.

Ngwa ngwaahịa

ngwaahịa-nkọwa1

Nka nka:

Ụdị nzacha	n'ime-apụ
Ihe Membrane	PVC emegharịrị
MWCO	100K Dalton
Mpaghara Membrane	34m²
NJ Membrane/OD	1.0mm / 1.8mm
Akụkụ	Φ200mm*1710mm
Nha Njikọ	DN50 na-amachi

Data ngwa:

Flux mmiri dị ọcha	10,000L/H (0.15MPa, 25 ℃)
Flux emebere	35-100L/m².hr (0.15MPa, 25 ℃)
Nrụgide Ọrụ akwadoro	≤ 0.2MPa
Nrụgide transmembrane kacha	0.2MPa
Okpomọkụ arụ ọrụ kacha	45 ℃
Ọnụ ego PH	Na-arụ ọrụ: 4-10; Ịsa: 2-12
Ụdị ọrụ	Cross-flow ma ọ bụ Ọnwụ-ọgwụgwụ

Ihe achọrọ mmiri inye nri:
Tupu inye mmiri nri, a ga-edobe ihe nzacha nchekwa <50 μm iji gbochie mgbochi nke nnukwu irighiri mmiri dị na mmiri siri ike kpatara.

Turbidity	≤15NTU
Mmanụ & Griiz	≤2mg/L
SS	≤20mg/L
Mkpokọta Ígwè	≤ 1 mg/L
Chlorine fọdụrụnụ na-aga n'ihu	≤5pm
COD	Atụ aro ≤ 500mg/L

* Ihe mejupụtara akpụkpọ ahụ UF bụ plastik polymer organic, a gaghị enwe ihe mgbaze organic ọ bụla na mmiri raw.

Oke arụ ọrụ:

Nrụgide ịsa azụ kacha	0.2MPa
Ọnụego ịsa azụ azụ	100-150L / m².hr
Ugboro ịsa azụ	Kwa 30-60min.
Ogologo oge ịsa azụ	Afọ 30-60
Ugboro CEB	0-4 ugboro kwa ụbọchị
Ogologo oge CEB	5-10 nkeji.
Ugboro CIP	Kwa ọnwa 1-3
Chemicals ịsa:
Sterilisation	15ppm sodium Hypochlorite
Ịsacha ihe mmetọ Organic	0.2% sodium Hypochlorite + 0.1% sodium Hydroxide
Ịsacha Mmetọ Inorganic	1-2% Citric Acid/0.2% Hydrochloric Acid